Home

Picture Galleries

Mounting Options

Buying Info

Product Info

Site Info

Print Specification

All prints are supplied as open editions, individually numbered and signed by the artist, Trevor Birch, in the title area of the print. Each print is also supplied with a self-adhesive title label, numbered and signed to match the print, that is intended to be fixed to the back of the frame. The print numbering sequence is independent of print size and formatting options.

Each print is printed to order on genuine Epson Premium Semigloss paper using an Epson inkjet printer that uses Ultrachrome K3 inks. In addition to giving superb print quality, these inks give the print an estimated life of 70-80 years under normal domestic viewing conditions.

Mount Specification

Mounted prints supplied by Aardstorm Images use Daler Rowney Studland Conservation Grade mount board, with a bevel cut aperture, together with a corresponding Conservation Barrier Board backing. These materials meet the requirements of the Fine Art Trade Guild Conservation Level. The combination of mount and backing boards result in a mounted print thickness of approximately 2.5 mm, and is intended to be supported by the hardboard (or similar) backing of a standard print frame. See the 'Prices and Options' page for details of the mount colours available.

Handling and Display Precautions

Observing the following precautions will maximise the lifetime of your print:

• Try to avoid handling your print with bare hands, especially the printed surface; use clean cotton gloves, or keep such handling to an absolute minimum.
• Display your print behind glass (or acrylic equivalent) within a proper picture frame.
• Avoid contact between the printed surface and the frame glazing material; use an intermediate mount.
• Use acid-free mounting materials, such as the conservation grade boards supplied by Aardstorm Images.
• Use an acid-free backing or barrier board between the print and the standard frame backing material. This isolates the print from contamination by the frame backing.
• Do not use ordinary adhesive tapes to attach the print to the mount board; use acid-free tapes designed for the purpose.
• Do not display your print in a position where it receives direct sunlight, or other sources of light with a high UV content. If this is necessary, use a frame with special glazing or coating materials that reduce the UV light that reaches the print.

Aardstorm Images observes these precautions, where appropriate, during the production of each print.

© Aardstorm Images 2006 All rights reserved
| Home | Galleries | Mounts | Ordering | Product Info | Site Info |